Abstract

The Spanish market for dental prosthetics was the fifth-largest in Europe in 2008. The market is expected to increase at a rate slightly higher than the population growth rate until the end of the forecast period. The main driver in Spain is the strong demand by patients for restorations due to a strong emphasis on aesthetics.

TABLE OF CONTENTS

TABLE OF CONTENTS.I
LIST OF FIGURES.IV
LIST OF CHARTSVI
EXECUTIVE SUMMARY 8
1.1 OVERVIEW: EUROPEAN AND RUSSIAN FEDERATION MARKETS FOR DENTAL
PROSTHETICS 8
1.2 TREND ANALYSIS BY COUNTRY 9
1.3 TREND ANALYSIS BY SEGMENT  10
1.4MARKET FOR CROWNS AND BRIDGES  11
1.5MARKET FOR DENTURES  12
1.6 CAD/CAMMARKET  13
1.7 LEADING DENTAL CAD/CAM COMPETITORS  14
RESEARCH METHODOLOGY 15
2.1 RESEARCH SCOPE . 15
2.2 9-STEP METHODOLOGY . 15
Step 1: Project Initiation & Team Selection  16
Step 2: Prepare Data Systems and Perform Secondary Research 17
Step 3: Preparation for Interviews & Questionnaire Design . 18
Step 4: Performing Primary Research 19
Step 5: Research Analysis: Establishing Baseline Estimates . 21
Step 6: Market Forecast and Analysis  21
Step 7: Identify Strategic Opportunities  23
Step 8: Final Review and Market Release  24
Step 9: Customer Feedback and Market Monitoring 25
INTRODUCTION TO DENTAL PROSTHETICS. 2
3.1 STATISTICS ON DENTAL HEALTH IN EUROPE AND THE RUSSIAN FEDERATION  26
3.2 CROWNS AND BRIDGES 26
3.2.1 Crowns 26
3.2.2 Bridges 27
3.2.3 Material Types  27
3.2.3.1 Full-Cast Crowns and Bridges 27
3.2.3.2 Porcelain-Fused-to-Metal: Semi-Precious and Precious Alloys27
3.2.3.3 Porcelain-Fused-to-Metal: Non-Precious Alloys28
3.2.3.4 All-Ceramic Devices.28
3.3 INLAYS AND ONLAYS . 28
3.3.1 Material Types  28
3.3.1.1 Gold 28
3.3.1.2 Porcelain 29
3.3.1.3 Composite Resin .29
3.4 DENTURES. 29
3.4.1 Full Dentures  29
3.4.2 Partial Dentures  29
3.5MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS 30
3.5.1 Conventional Fabrication. 30
3.5.2 CAD/CAM Technology  30
3.5.3 Three-Dimensional Printing  30
3.5.4 Digital Impression-Taking 31
SPANISH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS. 32
4.1 INTRODUCTION  32
4.2MARKET OVERVIEW FOR DENTAL PROSTHETICS. 33
4.2.1 Market Analysis and Forecast  33
4.3MARKET DRIVERS AND LIMITERS  37
4.3.1 Market Drivers 37
4.3.2 Market Limiters 38
4.4MARKET FOR CROWNS AND BRIDGES  40
4.4.1 Market Analysis and Forecast  40
4.4.2 Porcelain-Fused-to-Metal Market  43
4.4.3 Full-Cast Market 48
4.4.4 All-Ceramic Market . 49
4.5MARKET FOR DENTURES  51
4.5.1 Market Analysis and Forecast  51
4.5.2 Market for Full Dentures 54
4.5.3 Market for Partial Dentures  55
4.6MARKET FOR CAD/CAMSYSTEMS  56
4.6.1 Market Analysis and Forecast  56
4.7MARKET DRIVERS AND LIMITERS  58
4.7.1 Market Drivers 58
4.7.2 Market Limiters 59
4.7.3 Full In-Lab CAD/CAM Systems. 60
4.7.3.1 Competitive Analysis 63
4.7.4 Standalone Scanner CAD/CAM Systems  65
4.7.4.1 Competitive Analysis 68
4.7.5 Chairside Systems . 70
4.8 COMPETITIVE ANALYSIS  73
ABBREVIATIONS 77

LIST OF FIGURES
EXECUTIVE SUMMARY 8
RESEARCH METHODOLOGY 15
INTRODUCTION TO DENTAL PROSTHETICS 26
SPANISH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS  32
Figure 4-1: Dental Prosthetics Market (€), Spain, 2005-2015 . 35
Figure 4-2: Dental Prosthetics Market (US$), Spain, 2005-2015  36
Figure 4-3: Market Drivers and Limiters for Dental Prosthetics, Spain, 2008. 39
Figure 4-4: Crowns and Bridges Market (€), Spain, 2005-2015 . 41
Figure 4-5: Crowns and Bridges Market (US$), Spain, 2005-2015  41
Figure 4-6: Crown and Bridges Segmented by Material Type, Spain, 2005-201544
Figure 4-7: PFM Devices Market (€), Spain, 2005-2015  46
Figure 4-8: PFM Devices Market (US$), Spain, 2005-2015. 46
Figure 4-9: Full-Cast Devices Market (€), Spain, 2005-2015 . 48
Figure 4-10: Full-Cast Devices Market (US$), Spain, 2005-2015 . 49
Figure 4-11: All-Ceramic Devices Market (€), Spain, 2005-2015 . 50
Figure 4-12: All-Ceramic Devices Market (US$), Spain, 2005-2015  50
Figure 4-13: Dentures Segmented by Type, Spain, 2005-2015 52
Figure 4-14: Dentures Market (€), Spain, 2005-2015 . 53
Figure 4-15: Dentures Market (US$), Spain, 2005-2015  53
Figure 4-16: Dentures Market Segmented by Type, Spain, 2005-2015  54
Figure 4-17: CAD/CAM Systems, Spain (€ and US$), 2005-2015  56
Figure 4-18: Market Drivers and Limiters for CAD/CAM System, 2008  59
Figure 4-19: Full In-Lab CAD/CAM Systems Market, Spain (€), 2005-2015  61
Figure 4-20: Full In-Lab CAD/CAM Systems Market, Spain (US$), 2005-2015 61
Figure 4-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Spain, 2008 64
Figure 4-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Spain
(€), 2005-2015  66
Figure 4-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Spain
(US$), 2005-2015. 66
Figure 4-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM
Systems, Spain, 2008 . 69
Figure 4-25: Chairside CAD/CAM Systems Market, Spain (€), 2005-2015  71
Figure 4-26: Chairside CAD/CAM Systems Market, Spain (US$), 2005-2015  71
Figure 4-27: Total Market Share of In-Lab CAD/CAM Systems, Spain, 2008  75
Figure 4-28: Total Market Share of CAD/CAM Systems, Spain, 2008  76
ABBREVIATIONS  77

LIST OF CHART S
EXECUTIVE SUMMARY 8
Chart 1-1: Dental Prosthetics Market (€), Europe, 2005-2015  8
Chart 1-2: Market Value of Dental Prosthetics by Country, 2008 9
Chart 1-3: Full-Cast Crowns and Bridges Market (€), Europe, 2005-2015  10
Chart 1-4: Unit Share by Material Type for Crowns and Bridges, Europe, 2005-2015  11
Chart 1-5: Dentures Market (€), Europe, 2005-2015  12
Chart 1-6: CAD/CAM Systems Market (€), Europe, 2005-2015  13
Chart 1-7: Market Share for In-Lab CAD/CAM Systems, Europe, 2008  14
RESEARCH METHODOLOGY 15
INTRODUCTION TO DENTAL PROSTHETICS 26
SPANISH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS  32
Chart 4-1: Dental Prosthetics Market (€), Spain, 2005-2015  34
Chart 4-2: Crowns and Bridges Market (€), Spain, 2005-2015  42
Chart 4-3: Crowns and Bridges Segmented by Material Type, Spain, 2008 . 45
Chart 4-4: Crowns and Bridges Unit Share by Material Type, Spain, 2005-2015
 47
Chart 4-5: Dentures Market (€), Spain, 2005-2015 . 52
Chart 4-6: CAD/CAM Systems Market (€), Spain, 2005-2015  57
Chart 4-7: Full In-Lab CAD/CAM Systems Market, Spain (€), 2005-2015 . 62
Chart 4-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Spain,
2008 . 64
Chart 4-9: Market for Standalone Scanner CAD/CAM Systems, Spain (€), 2005-2015  67
Chart 4-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System
Units, Spain, 2008 . 69
Chart 4-11: Chairside CAD/CAM Systems Market, Spain (€), 2005-2015  72
Chart 4-12: Total Market Share of In-Lab CAD/CAM Systems, Spain, 2008 75
Chart 4-13: Total Market Share of CAD/CAM Systems, Spain, 2008 . 76
ABBREVIATIONS  77