Report Summary
As China actively promotes its role as the world's manufacturing center, it has been rewarded with unprecedented growth. The Chinese mold and die industry rides on this economic bandwagon. There are presently around 30,000 mold & die manufacturers who collectively employ 800,000 workers, in 2005 More than 20 manufacturers had individual production revenues of 100 million yuan, dozens of mid-sized enterprises attained 50-100 million yuan, while the rest of the industry accounted for orders of around 20 million yuan each.
The mold and die manufacturers garnered a 25% increase in sales and realize a turnover of 61 billion yuan in 2005. Meanwhile, production technology had been greatly improved, with some sectors rapidly catching up with their foreign counterparts. mold and die imports to China totaled US$2.068 billion in 2005,representing a 14.07% increase over the previous year, a clear indication that high technology-intensive mold and die local output cannot meet domestic demand. industry exports reached US$738 million, a whopping 50.31% increase over 2004.the proportion between import and export was 2.8:1,which was a significant improvement over the 3.69:1 figure in 2004. Chinese mold & die import and export figures in 2005 reached 2.806 billion dollars and net import was 1.33 billion dollars. China was the largest importing country in this industry. the Chinese mold and die industry continued to maintain a rapid growth rate for the first six months of 2006. This year's annual sales turnover is estimated to reach 70 billion Yuan, basing industry expectations of a similar percentage growth rate attained in 2005.
On a per product basis, plastic and rubber mold & die imports for 2005 totaled US$1.145 billion (55.4% of total imports) while exports reached US$532 million (72.1% of total exports, the same percent figures as 2004).Pressing mold & die imports for the same period were US$726 million (35.1% of total imports) while exports attained US$146 million (19.8% of total exports, with a sharp percentage increase over 2004.The increased export figures reflected the healthy increase in manufacturing output for this product type. This was mainly due to the high demand for middle and high level mold & die products as compared to normal dies. These highly demanded products are typically large sized, with high precision, increased design complexity and improved durability. The industry responded by setting up more specialized mold and die factories and by increasing output. aggregate industry investments came from local and foreign sources as well as state owned enterprises , which stepped up for joint-stock reform.
This report will answer the following important questions relating to the Chinese mold and die industry:
-What is the present condition of China's mold and die industry?
-What is its macro–environment?
-What state policies impact on an investor's plans to seize its market opportunities?
-How does it relate to developments of the downstream industries which act either as catalysts or obstacles to the industry's growth?
-How does the competition behave and what threats does it pose to a new industry player?
-What is its customers' purchasing behavior and how can one capitalize on this key market characteristic?
-What are the over all prospects for the industry ?
This report is well researched, obtaining information from a wide variety of sources such as the National Bureau of Statistics of China, China Customs, National Development and Reform Commission, China instrument Association, China Rubber industry Association, China Auto Industry Association, China Association of Machinery and Electricity Integration Technology, China Mold & Die Industry Association and China Industry Research Institutes, as well as the latest news resources. This report also draws reference information relating to the development of automotive, motorcycle, machineries, and electronics and plastics industries. industry forecasts were arrived at by using time-series analysis, regression and correlation analysis on the data of production, sales, market competition status, market structure, technology, product line and international sales of the Chinese mold & die industry from 2001 to 2006.
The report will be an invaluable guide for mold & die manufacturing and trading companies, to help them identify and capitalize on market opportunities, and to select and decide on the proper investment projects and strategies. This report is also of great value for the credit evaluation departments of banks and other lending institutions as well as for some specialty steel manufacturers.
Report Outline
Part 1 Analysis on Overall Development of China's Mold & die Manufacture Industry
Chapter 1 The Status of China's Mold & die Industry
1.1 Overall analysis on Chinese Mold and die Industry, 2005
1.2 The status and role of Chinese mold and die industry in national economy
1.3 Analysis on the main characteristics of mold and die industry, 2005
1.4 The focus of mold and die industry in next five years
1.4.1 Automobile Panel Dies
1.4.2 Precision Pressing Die
1.4.3 Large and Sophisticated Plastic Mold
1.4.4 Other High-Technology Molds
1.5 The main problems in Chinese mold and die industry
Chapter 2 Analysis on Global Mold & die Market
2.1 The general statement on main mold and die market in the world
2.2 Analysis on major countries
2.1.1 Japan
2.2.2 American
2.2.3 Germany
2.3 World competitive situation and the current status of China
2.4 The prediction on the world's mold and die industry
Chapter 3 Analysis on Production of Chinese Mold & die Industry
3.1 Analysis on Yield of mold and die industry between 2003-2005
3.2 Analysis on the output of mold and die industry between 2003-2005
3.3 Analysis On China's mold and die manufacturing ability
3.4 Analysis on Major Production Regional in China's Mold and Die Markets
3.4.1 Guangdong Province
3.4.2 Zhejiang Province
3.4.3 Jianshu Province
3.4.4 Shanghai
3.4.5 Shandong Province
3.4.6 Anhui Province
3.4.7 Sichuan Province
3.5 Major Problems in Mold and die Industry and the Corresponding Strategies
3.6 Prediction of Chinese Mold and die Production, 2006-2007
Chapter 4 Analyses on Demand & Consuming of China's Mold & die Products
4.1 Statistics Analysis on the Consumption of China's Mold and die Industry
4.2 Main Characteristics on Consuming of China's Mold and die Industry
4.3 Survey on die Consumer's Preference
4.4 Price-sensitivity Analysis
4.5 Forecast of China Mold & die Demand, 2006-2007
Chapter 5 Analysis of the Mold Import & Export in China
5.1 Comparative Analysis of the Principal Molds Import and Export in China, 2005
5.1.1 Comparative Analysis of the Volume of Mold Import and Export
5.1.2 Comparative Analysis of the Import and Export Volume
5.2 Comparative Analysis of the Import & Export Volume of Classified Mold in China, 1995 to 2005
5.3 the Main Cause of the Change on Import and Export of China's Mold and die Industry
5.4 The Prediction of the Development of General Importation & Extortion on 2006 China's Mold and die Industry
Chapter 6 Analysis of the Price of Molds in China
6.1 Comparative analysis on Average price of China's Mold Markets in 2001-2005 & its Causes
6.2 Evaluation, Quotation and the Price of the Mold
Chapter 7 Analysis on Technology of China's Mold & die Industry Development
7.1 Current Status of the Technology Development of Mold & Die Industry
7.2 Historical background of Development
7.3 The Technology gap Between China and Foreign Countries and its Main Causes
7.4 Policies for Technology Improvement of China's mold & die Industry
7.5 Comparative Analysis on Equipment of Domestic vs. Foreign Manufacturers
Part 2 Analysis of Industry Sales & Competitiveness
Chapter 8 Analysis on Sale of China Mold & Die Products
8.1 Sales Snalysis by Product
8.1.1 Historical Sales Statistics
8.1.2 Sales Statistics by Different Regions, 2005
8.2 Analysis of Main Distribution Channels
8.3 Analysis of Principal Sales Methods
Chapter 9 The Competitiveness of Chinese Mold & die Industry
9.1 Comparative Analysis on Productivity per Capita vs. Social average Productivity
9.2 Comparative Analysis on Productivity per Capita at Home & Abroad
9.3 Comparative Analysis on Return on Capital (ROC) for the Industry vs. Social Average Return on Capital
Chapter 10 Analysis on Internal & External Competition
10.1 Competition Between Domestic and Foreign Companies
10.2 Competition Among Enterprises with Different Scale
10.3 Competition Among Enterprises with Different Ownership
10.4 Future Directions on Internal and External Competition
Chapter 11 Major Types of China's Mold & die the Industry
11.1 Pressing die
11.2 Plastic Mold
11.3 Die Casting
11.4 Rubber Molds
11.5 Electronic Product Die
Part 3 Analysis of Main Factors Affecting the Development of China's die Industry
Chapter 12 Domestic Macro-economic Environment
12.1 Analysis of Correlativity Between GDP Growth Rate and Mold & die Sale Growth Rate
12.2 Prediction of Macro-economic Development for 2006
Chapter 13 Analysis of China's Mold & die Industry Policies
13.1 The Eleventh Five-year for Mold and Die Industry
13.2 Governmental Encouraging Policies for the Development of Mold and die Industry
13.3 China's tax Policy for Mold and die Industry
13.4 Investment Policy for Mold and die Industry in China
Chapter 14 The Impacts on Mold Production Caused by the Development of Die Steel Industry
14.1 The Analysis of Supply-Demand of die Steel-using in China
14.2 The Statement of Chinese Die steel Technologies
14.3 The Imports Survey of Chinese die Steel
14.4 Die Steels’ Impact on the Mold and die Industry Development
Chapter 15 The Downstream Mold & die Industry's Impact on the Demands for Mold & die
15.1 The Development of the Vehicles Industry's Impact on the Demands for Mold & die
15.2 The Development of the Machine Industrial Impact on the Demands for Mold & die
15.3 The Development of the Plastic Industry impact on the Demands for Mold & die
15.4 The Development of the Electronic Industry impact on the Demands for Mold & die
Part 4 The Analysis of the Main Companies
Chapter 16 The Analysis of the Main Companies
16.1 Guangdong Greatoo Molds Inc
16.1.1 Brief Introduction
16.1.2 Current Situation
16.2 Guangdong Shengdu Mold Co., Ltd
16.3 Dongfeng Motor Die and Mold Co., Ltd
16.4 Die Manufacturing Co.,Ltd. Of Faw-
16.5 Beijing Biyadi Mold Co., Ltd
16.6 Tianjin Automobile Mold Co., Ltd
16.7 Sichuan Chenfei Integration Technology Corp. Ltd
16.8 Liuzhou Wuling Motors Co., Ltd. Mold Center
16.9 Jiangyin Jiangnan Mold Plastic Science and Technology Co., Ltd
16.10 Zhejiang Haitian Company
16.11 Zhejiang Taoshi Mold Group Co., Ltd
16.12 Qingdao Haixin Mold Co., Ltd
Chapter 17 The Contrast Analysis Between the Domestic & Abroad Companies
17.1 The Comparison of Mode of Operations
17.2 The Comparison of Equipment
Part 5 The Analysis of the Hot Issue
Chapter 18 The Influence on the Future Mold Manufacturing According to the Anti-dumping Check by the United States
18.1 The Main Content of USA Anti-dumping Investigation for China
18.2 The Nature of USA anti-dumping Investigation for China
18.3 The Influence of Anti-dumping Investigation of USA on Future Development of Die-manufacturing Industry
18.4 How to Predate the Anti-dumping Trade Frictions Against Mold and die Exports from the Abroad
Part 6 Analysis on Investment Value, Risk & Strategy
Chapter 19 Analysis of the Investment Value of the Mold & die industry
19.1 Analysis of the Investment Value performance
19.1.1 Profit-making Ability of the Industry
19.1.2 Credit Capacity of the Industry
19.1.3 Development Potential of the Industry
19.2 Analysis of the Mainly Invested Molds
19.3 The Analysis of the Key Investment area
Chapter 20 Analysis of the Investment Risk and Suggestions on China's Mold & die Industry
20.1 Analysis on Investment Risk
20.2 Analysis on Investment Strategy
